Is tuberose flower wax stable through repeated melting and cooling cycles?
Yes — the wax withstands normal melting and cooling cycles used in production without significant quality change.
Recommended Melting
| Item | Guidance |
|---|---|
| Method | Water bath / double boiler |
| Temperature | 55–62 °C (below 80 °C always) |
| Time | As short as possible, stir gently |
Stability Notes
- Repeated cycles (3–5): aroma and melting point remain stable in normal factory use
- Avoid: direct flame, overheating above 80 °C, prolonged holding at high temperature — these volatilize the delicate top notes and may darken the wax
- Do not repeatedly remelt the same stock many times; plan portions to minimize cycles
Heat-Stability Evidence
Batch QC includes a heat-stability check: melting point, acid value and color are re-verified after melt-cool cycles. This data supports your process validation and formula stability files.
Relate Products
This article was published on 2026-09-07, and last updated on 2026-09-07. The article will be continuously updated.
